FORTUS 900mc

Designed and manufactured for the highest accuracy and repeatability, this production system is distinct from other additive fabrication systems. It provides part tolerances that are substantially improved over previous systems.

ESPECIFICACIONES TÉCNICAS:

System Highlights:
• Largest build envelope of 36 x 24 x 36 inch (914 x 610 x 914 mm)
• Highest throughput - 2.2 x faster than the Fortus 200mc
• Precision ball screw technology for increased accuracy, repeatability, and reliability
• Holds the most material volume
• Based on material, manufactured parts can be used for high heat applications

System Size (XYZ):
109.1 x 66.3 x 79.8 inches ( 2772 x 1683 x 2281 mm)

System size with manufacturing light tower (XYZ):
109.1 x 66.3 x 89.8 inches (2772 x 1683 x 2281 mm)

Standard Capacity Build Envelope:
36 x 24 x 36 inch (914 x 610 x 914 mm)
The system will accept two build sheet sizes:
-- 36 x 24 x 36 inch (914 x 610 x 914 mm) build sheet or
-- 16 x 14 x 16 inch (406 x 356 x 406mm) build sheet

Thermoplastic Build Materials:
ABS-M30 thermoplastic (acrylonitrile butadiene styrene)
ABS-M30i thermoplastic (acrylonitrile butadiene styrene)
PC-ABS thermoplastic (polycarbonate acrylonitrile butadiene styrene)
PC-ISO thermoplastic
PC thermoplastic (polycarbonate)
ULTEM** 9085 thermoplastic
PPSF/PPSU thermoplastic (polyphenylsulfone)

Achievable Accuracy:
Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch(+/- .089 mm or +/- .0015 mm per mm whichever is greater

Network Communication:
10/100 base T connection. Ethernet protocol

Operating Environment:
Maximum room temperature of 85°F (29.4°C)
Maximum room humidity of 80%.

Power Requirements:
230VAC nominal 3-phase service with 5% regulation.
*230VAC as measured phase-to-phase.
50 Hz or 60Hz
40 Amp circuit

Software:
InsightTM
Control CenterTM
FDM TEAMTM (optional advanced software)